Belimo Damper motor Kit for Synchron, Lennox, Jackson, Retrozone, Young (Kit 4)

Description

Check the 5 digit number on the side of your synchron motor, that ends in an "R" or an "L". This kit will retrofit any motor, with the much finer Belimo LMB24, that has the cross pin end on the motor shaft.
These numbers will cross over to this kit:
37789R
38766R
38929L
39154R
This kit works on most dampers that had a Hansen Synchron or Cramer 2 wire "spring return" motor that has the output shaft shown in the last picture.  MAKE SURE the output shaft of your motor looks like the one in the last picture, the motor with the two yellow wires. If not, our Ebay store Damper Direct has many other retrofit kits and adapters to get almost any damper back in business - your satisfaction is guaranteed!
This auction is for a Belimo LMB24 Motor and retrofit kit, what is included is the Belimo LMB24-3-T motor, shaft adapter, capture bracket, anti rotation bracket and two self tapping sheet metal screws shown in the first picture; anything else in the other picture is for illustration purposes only.
Tired of replacing spring return damper motors that get hot and burn out? The Belimo LMB24 is one of the finest damper motors on the market today, with a five year factory warranty and outstanding reputation. This kit includes the premier commercial grade Belimo LMB damper motor and adapter kit for about the same price - or less than - the the stock 2 wire spring replacement motor. This kit will also work on almost any damper where the original motor had the output shaft of the Synchron motor shown in the last picture (motor with 2 yellow wires).
Our Pictures:
1. This is what you get with this retrofit motor kit, any items shown in other pictures are for illustration purposes only.
2. Belimo LMB motor shown mounted to old damper, old take off Synchron motor in foreground. Works on round dampers as well.
3. The slotted input of the damper after old motor is removed.
4. Illustrated instructions, also available on how to hook up this 3 wire motor to a zone control panel with only two damper outputs terminals.
5. Brackets from kit mounted on damper, before motor is installed (damper is laying on its side)
6. Another picture of Belimp LMB motor mounted on the old damper.
7. Old take off Synchron brand motors, remove your old motor and make sure your old motor has the identical output shaft with cross pin (Synchron motors were made with many different outputs).
*Retrofits the industry leading LMB24-3-T motor on to many residential dampers, including Many Lennox, Young Regulator, Enerzone Systems Corp., Retrozone Inc., Jackson Controls, others who used this style of Synchron or Cramer motor.
*5 year warranty
*Gets rid of spring return motors for better reliability and energy savings.
*Works with any brand of standard 24vac zone control system.
*Saves energy, extends motor life, far more powerful motor with 5 year warranty.
*requires three wires to motor and the mounting of the anti-rotation bracket with two self tapping screws, included.
*24vac 2 va damper motor
*Part no. LMB-K3
Spring return damper motors pull 8 to 10 va of continuous power since they must overcome the return spring. Besides wasting energy, the spring return motors get very hot, contributing to their often premature failure. The Belimo LMB24-3-T retrofit kit motor uses just 2va for  90 seconds, and never even gets warm to the touch! A five year warranty is best in the business, so stop replacing those overpriced spring return motors!
Your current damper has just two wires to the motor, will this 3 wire motor work?  Yes, but you will need a third wire from the zone control panel or thermostat to allow this 3 wire motor to work-very often, standard 4 wire thermostat wire will have been used so check the cable for extra wires. Most zone control panels support three wire motors, including all Honeywell panels, check your zone control board damper outputs for an unused terminal, if your damper outputs are labeled M1,M4, and M6, OR Power Open PO. Power Close PC  and Common C, you have all the outputs you need and are good to go.
Even if your zone panel has just two damper outputs, you can still use this kit since the Belimo LMB motor will accept an alternative wiring procedure that places full time 24vac power on terminals 1 and 2, and then uses the current zone board output for terminal 3.  Full illustrated instructions are included.
From Damper Direct, where zoning is our only business! We offer the service, support, and technical resources to help you design or service your Zone Control System.
We handle all major brands including Retrozone, Honeywell, EWC, Durozone, Enerzone Systems Corp., Robertshaw, Invensys and more. If you don't see it on ebay, please ask and we can do a special Ebay auction for the part you need.