Retrofit Retrozone Enerzone Flexdamper System with 20 Damper Dampners included!

Description

Note: This listing is for 1 3 Zone System including up to 20  six inch round Flexdampers ,  and includes all support parts for a 3 zones system with up to twenty dampers.  Pictures are to show other system componets, including rectangular Retrofit Flexdampers, and the solenoid panel and pumping unit.
Your particular system may require more or less dampers, and different types of parts.  We will adjust our pricing accordingly when we have accurate information on your system.
The price shown demonstrates a typical system price for a zones system using Q20 six inch round Flexdampers.  Your price will be different based on your exact parts, and we will advise you of an exact price via an estimate form if you contact us or email us through eBay. Our phone number is 972 633 8104.
Thousands of Flexdamper(tm) Airzone  Systems have been sold since 1988.  The most popular markets are Midwest and Northeast homes, multi-level, built with basement HVAC systems and trunk lines and multiple 5, 6, or 7 inch round take-offs.   These systems were never designed for traditional dampers and zoning systems, but can be done effectively and economically with the Flexdamper system.
Closing up the dampers behind sheetrock? While its never a good idea to close up any device that could need service, Flexdampers with home run tubing by far offer the best system for doing so.  Call us and ask why.
What's included in the sample price:
Q20 round six inch Flexdampers.
Q1 Solenoid Panel and Pump to inflate and deflate the Flexdampers.
Q1 SZC-3 Robertshaw Zone control Panel
Q1  Durozone DDRD-10 Barometric Relief damper
Q3 Robertshaw digital programmable thermostats.
250 feet of tubing, a transformer,  low temp limit,  connect tape
Everything needed for most jobs except thermostat wire
Remember, we will adjust the price based on your actual needs. Any yes, you can supply your own thermostats-almost any type will work.
Reliability: Its outstanding, with damper cycle likes far surpassing electric motorized dampers. Here is what you need to know: Flexdampers are made from 100% virgin urethane, not cheap PVC.   Flexdampers operate with both pressure and vacuum, and when open are completely flat and fully evacuated, and offer less air pressure drop than standard dampers. Inflation pressures are less than 1/2 of a PSI, so the rugged and thick urethane material is never stretched, only "relocatated" to block the airflow.  Flexdampers  are not physically attached to the duct, and thats why they still offer a service potential, even when located behind sheetrock.
Let us get A Retrozone (tm) brand  Flexdamper (tm) retrofit zoning system together for your needs.  We will then place your custom retrofit system on ebay for you to purchase, with just the right parts and pieces.
The Flexdamper Retrofit zoning system has been the solution since 1988 for homes and offices not originally designed for HVAC zoning.  Less cost, less labor, and better performance are the hallmarks of the proven design-backed by a money-back guarantee!
How the Flexdamper system works:  the low cost inflatable Flexdampers are inserted into each duct; its not uncommon to have 20 or more Flexdampers on a single application-but thats possible because of the low individual cost of each Flexdamper. As well, Flexdampers can be installed in duct systems with limited access,  from the register, or even remotely down ducts that have been sheetrocked over, with special installation tools.
This Patented system uses a  small air pump to provide both pressure AND vacuum to inflate and deflate the system.  100% virgin urethane construction and air pressure less than 1/2 psi give Flexdampers a cycle life of 500,000 cycles and more-twice the average life of a motor driven mechanical damper.
Configuration: Use any thermostats and zone control panel you wish, Including Honeywell Wireless Redlink zoning products-The Flexdamper system is 24volts AC operated and is interchangeable with standard 24vac motor driven dampers.  From us, you will also need a Solenoid panel and pump SPP panel, and air connection tubing.
ROUND SIZES AVAILABLE 4,6,7,8,9, and 10.  Rectangual sizes from 24 x 14 inches to 3 x 6 inches.
Send us a message, or for technical help 972-633 8104 we will develop a parts list.
PRICES VARY DEPENDING ON SIZE. ALL FLEXDAMPERS REQUIRE AN AIRZONE SPP PANEL AND PUMP FOR OPERATION. THIS ITEM IS ALSO AVAILABLE IN RETROZONE'S EBAY STORE DAMPERS DIRECT.  PLEASE EMAIL OR  RETROZONE AT  972 633 8104 WITH ANY QUESTIONS YOU HAVE.